Robot Control RSS

Introduction Here, I am going to explain how to setup Raspberry Pi 3 for development of a RT control application.  Get SD Card Image of RT-Linux for RPI Get the pre-compiled SD card image in the link below https://guysoft.wordpress.com/2017/10/09/realtimepi/ In this tutorial, I am using an image located in the folder of this document https://drive.google.com/open?id=1NVvlsqfjDoWI2gM42Lavmmj2-H9tWXM5 Write the image Prepare an SD card. Here, I am using an 32GB micro SD card. With an SD card writing tool (here, Etcher), write the image in the SD card. https://www.balena.io/etcher/ Setup a static IP address of Raspberry Pi Open /etc/dhcpcd.conf in the SD card...

Read more

control, raspberry pi, raspberry pi zero w, real-time, real-time linux, robot, rpi, rpi zero w, rt, rt linux -

Introduction Here, I am going to explain how to setup Raspberry Pi Zero W for development of a RT control application.  Get SD Card Image of RT-Linux for RPI Get the pre-compiled SD card image in the link below https://guysoft.wordpress.com/2017/10/09/realtimepi/ In this tutorial, I am using an image located in the folder of this document https://drive.google.com/open?id=1NVvlsqfjDoWI2gM42Lavmmj2-H9tWXM5 Write the image Prepare an SD card. Here, I am using an 32GB micro SD card. With an SD card writing tool (here, Etcher), write the image in the SD card. https://www.balena.io/etcher/ Setup WIFI setup before the first booting Open and modify the file...

Read more